Free UK delivery on orders over £150
Valvenok
JOSCAR RegisteredBVAA member
Track Order
Quick Order
Cart
Sign In
Request a quote

Tubings & Fittings

Sanitary fittings

Polished stainless-steel tri-clamp clamps, ferrules and end caps for dairy, food, pharma and biotech lines. A tri-clamp joint is quick to open and close, and leaves a nearly smooth bore with no dead spots, so it cleans easily.

Made byAdaptix
5products

Clamps, ferrules and end caps

DN 6–300

½″ to 12″, ISO 2852 / DIN 32676 / BS 4825

304 / 316L

Also 316, 304L and duplex stainless

3.1cert

EN 10204 material certificate with every delivery

Fitting finder

Not sure which parts?

Pick what you need to do and we’ll show which parts make up the joint.

What do you need to do?

How it works

Three parts make one joint

  1. Ferrules are welded to the two tube ends.
  2. A gasket sits between the two ferrule faces.
  3. The clamp closes round both flanges and squeezes them onto the gasket.
TubeweldFerruleGasketClampSealed: smooth bore, no threads

Quality & finish

The same standard on every part

Every clamp, ferrule and cap comes with the same paperwork and marking. The parts that touch the product share the same hygienic finish.

With every order
  • EN 10204 3.1 certificate
    with every delivery
  • Marked on every part
    maker, size, heat number and material grade
  • Test reports available
    mechanical, chemical, NDT, IGC and PMI
  • 180-day warranty
    packed on pallets, in cases or cartons
Finish & hygiene
Ra < 0.4µm
Inside surface of ferrules and caps (< 0.8 µm outside)
H3 / H4
Hygienic class to DIN 11866
5grades
316L, 316, 304, 304L or duplex
Surface finishes
Mechanically polishedElectropolishedMirror polished

Sanitary fitting questions

What is a tri-clamp connection?

Two ferrules welded to the tube ends, a gasket between them, and a clamp that holds them together. It is quick to open and close, and leaves a nearly smooth bore with no dead spots or biofilms, so it cleans easily.

Which standards do these fittings match?

DIN 32676, ISO 2852, ISO 1127, BS 4825 and ASME BPE, from DN 6 to DN 300 (½″ to 12″). Custom sizes on request.

Do they come with a material certificate?

Yes. Every delivery comes with an EN 10204 3.1 material certificate, and each part is marked with size, heat number and material grade.

Are tri-clamp fittings suitable for CIP and SIP?

Yes. Adaptix lists CIP / SIP among their applications. Ferrules and blind covers are rated for sterilising at 150 °C, and sight glass end caps work from −30 to 230 °C.

Need sanitary fittings?

Send us the tube size, material, finish and quantities, and we’ll quote with the 3.1 certificate included.

Get a quote