Free UK delivery on orders over £150
Valvenok
JOSCAR RegisteredBVAA member
Track Order
Quick Order
Cart
Sign In
Request a quote

Sanitary fittings

Adaptix

Tri-clamp clamps

The clamp closes round two ferrule flanges with a gasket between them and holds the joint tight. Two types from Adaptix, single pin and double-bolted, in 38 sizes from DN 6 to DN 300.

Types
Single pin, double-bolted
Sizes
DN 6 – DN 300
Standards
ISO 2852, DIN 32676, BS 4825
Material
304 standard, 316L, duplex
Working
Up to 50 bar
Test
18 – 100 bar
Adaptix single pin tri-clamps in five sizes
Single pin heavy-duty tri-clamps in five sizes

How they close

Anatomy of a clamp

Both clamps close round the ferrule flanges. The clamp size A is the flange diameter it fits, so it always matches the ferrule.

Single pin
S type
Aflange it fitsHinge pinWing nutSwing boltJoint closed
The halves pivot on a hinge pin. A swing bolt drops into the slot and the wing nut is turned down by hand.
Double-bolted
SSH type
Aflange it fitsBolt + nutBolt + nutJoint closed
No hinge: a bolt on each side draws the two halves together, tightened with a tool for high operating pressures.

Compare

Single pin or double-bolted?

Same sizes and finish. They differ in how they close and how much pressure they take.

Single pin heavy-duty clamp

Single pin

S type
Max. working pressure
9–50 bar at 150 °C
50
bar
050 bar
Closes with
Wing nut
Clamp size
Thickness T 5.6–20 mm
Options
Different wing nuts available
See 19 models
Double-bolted heavy-duty clamp

Double-bolted

SSH type
Max. working pressure
9–18 bar
18
bar
050 bar
Closes with
Two bolts, tightened with a tool
Clamp size
Width W 16–30 mm
Options
Stainless steel A2 or brass nuts
See 19 models
The same on both clamps
Sizes
19 each, DN 6–DN 300
Test pressure
18–100 bar
Finish
Mechanical, electro or mirror polished
Fits
All tri-clamp ferrules

Size finder

Find your clamp size

Pick your line size. We’ll show the clamp diameter, the matching standard sizes and the part code for each type.

50.5mm
clamp diameter (A)
ISO 2852DN 8/10/15/20/25
DIN 32676DIN 32/40
BS 48251″–1½″
Fits lines listed as DN 8/10/15/20/25, DIN 32/40, 1″–1½″. Tell us the material and finish when you ask for a quote.

Traceability

Marked on the clamp

  • As cast on every clamp
    Maker’s name or logo, size, heat number and material grade.
  • Engraved on request
    Your own information, for example a line or tag number, so the right clamp goes on the right joint.
  • 3.1 certificate
    An EN 10204 3.1 material certificate comes with every delivery.
Single pin heavy-duty clamp
Close-up of the band
Example of the marking on a 2½″ clamp, with an optional engraved line.
ADAPTIX2½″HEAT No.1.4301
LINE 3 · CIP RETURN
Cast on every clamp
Your engraving (optional)

Tri-clamp clamp questions

Single pin or double-bolted clamp?

The single pin clamp is hinged and closes with a wing nut. The double-bolted clamp uses two bolts tightened with a tool. Both suit all tri-clamp ferrules at high operating pressures; check the working pressure for your size.

How do I find the right clamp size?

Match the clamp to the ferrule flange diameter (A). The size finder above shows the clamp diameter and the equivalent ISO 2852, DIN 32676 and BS 4825 sizes, with the part code for each clamp type.

Which materials are the clamps made in?

The standard material is stainless steel 1.4301 (304). 316L, 316, 304L and duplex are also available, and other materials on request.

Do the clamps come with a certificate?

Yes. Every delivery comes with an EN 10204 3.1 material certificate, and each clamp is cast with the maker’s name or logo, size, heat number and material grade.

Need the ferrules too?

Every joint needs two ferrules and a gasket as well as the clamp. Send us the line size and quantities and we’ll quote the set, with the 3.1 certificate included.