Free UK delivery on orders over £150
Valvenok
JOSCAR RegisteredBVAA member
Track Order
Quick Order
Cart
Sign In
Request a quote

Sanitary fittings

Adaptix

Ferrules & end caps

The ferrule is welded to the tube and gives it a clamp flange. End caps close a ferrule off, solid or with a glass window. Three products from Adaptix, in 98 part codes from DN 6 to DN 300.

Products
Ferrules, blind covers, sight glasses
Sizes
DN 6 – DN 300
Standards
ISO 2852, DIN 32676, BS 4825
Material
316L, 316, 304, 304L, duplex
Inside finish
Ra < 0.4 µm
Sterilising
150 °C
Two Adaptix tri-clamp ferrules in different sizes
Tri-clamp ferrules: the weld end on top, the clamp flange below

How they fit

One flange, three endings

Weld the ferrule on once. Then the same flange takes another ferrule, a blind cover or a sight glass, always with a gasket and a clamp.

A second ferrule on the next tube, a gasket between the faces, and a clamp round both flanges.
TubeweldFerruleNext tubeBlind coverSight glassClampGasket between the faces in every case

Ferrule finder

Everything for one joint

Pick your line size. We’ll list the ferrules for each tube, plus the clamp and caps that fit the same flange.

50.5mm
flange / clamp size (A)
ISO 2852DN 8/10/15/20/25
DIN 32676DIN 32/40
BS 48251″–1½″
Add a gasket for each joint and tell us the material and finish when you ask for a quote.

Finish and paperwork

The same on every part

Ferrules and caps touch the product, so they share the same polished bore, marking and certificate.

Ra < 0.4
µm
Inside surface (Ra < 0.8 µm outside)
150
°C
Sterilising temperature, ferrules and caps
H3 / H4
Hygienic class to DIN 11866
3.1
EN 10204 material certificate with every delivery
Mechanically or mirror polished
Electropolishing on request
Marked with size, heat number and grade
Custom ferrule sizes on request

Ferrule and end cap questions

How do I pick the right ferrule?

Start from your tube: the ferrule’s tube OD and ID must match the tube you weld it to. The flange diameter A then tells you which clamp, gasket and cap fit. The finder above lists them together.

What does the length L mean?

L is the length of the ferrule. Several tube sizes come in more than one length (12.7 to 28 mm), so check L against the space you have on the line.

Blind cover or sight glass end cap?

A blind cover is solid and closes a port completely, up to 25 bar depending on size. A sight glass end cap has a glass window so you can check inside, and is rated 1–16 bar depending on size.

Are they suitable for CIP and SIP?

Yes. Ferrules, blind covers and sight glasses are rated for sterilising at 150 °C, with Ra < 0.4 µm on the inside surface.

Do they come with a certificate?

Yes. Every delivery comes with an EN 10204 3.1 material certificate, and each part is marked with the maker, size, heat number and material grade.

Can I get a size that isn’t listed?

Custom ferrule sizes are available on request. Send us the tube OD, wall thickness and length you need.

Need the clamps too?

Send us the tube size and quantities and we’ll quote the whole joint: ferrules, gaskets and clamps, with the 3.1 certificate included.