Free UK delivery on orders over £150
TP820P(T) and TP825P(T), each available with (B) or without anti-microbial construction, across 50Hz and 60Hz operation.
| Base Model | Frequency Hz | Power Kw | Phase | Volt V | Amps A | Inlet In | Outlet In | Pressure Switch On Kg Cm2 | Pressure Switch Off Kg Cm2 | Pressure Tank L | H Max M | Q Max LMin | Nw Kg | Gw Kg | Pack Qty | Anti Microbial | Model Code | Id |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TP820P(T) | 50 | 0.18 | 1 | 200-240 | 1.4 | ¾" | ¾" | 0.9 | 1.8 | 1 | 25 | 30 | 6.7 | 7.7 | 32 | Anti-Microbial | TP820P(T)B | TP820P(T)B-50hz |
| TP820P(T) | 50 | 0.18 | 1 | 200-240 | 1.4 | ¾" | ¾" | 0.9 | 1.8 | 1 | 25 | 30 | 6.7 | 7.7 | 32 | TP820P(T) | TP820P(T)-50hz | |
| TP825P(T) | 50 | 0.37 | 1 | 200-240 | 2.2 | 1" | 1" | 1.8 | 2.8 | 1 | 30 | 35 | 7.6 | 8.6 | 32 | Anti-Microbial | TP825P(T)B | TP825P(T)B-50hz |
| TP825P(T) | 50 | 0.37 | 1 | 200-240 | 2.2 | 1" | 1" | 1.8 | 2.8 | 1 | 30 | 35 | 7.6 | 8.6 | 32 | TP825P(T) | TP825P(T)-50hz | |
| TP820P(T) | 60 | 0.18 | 1 | 110/220 | 3.2/1.6 | ¾" | ¾" | 1.2 | 2.4 | 1 | 34 | 35 | 6.7 | 7.7 | 32 | Anti-Microbial | TP820P(T)B | TP820P(T)B-60hz |
| TP820P(T) | 60 | 0.18 | 1 | 110/220 | 3.2/1.6 | ¾" | ¾" | 1.2 | 2.4 | 1 | 34 | 35 | 6.7 | 7.7 | 32 | TP820P(T) | TP820P(T)-60hz | |
| TP825P(T) | 60 | 0.37 | 1 | 110/220 | 5.2/2.6 | 1" | 1" | 2.0 | 3.0 | 1 | 36 | 42 | 7.6 | 8.6 | 32 | Anti-Microbial | TP825P(T)B | TP825P(T)B-60hz |
| TP825P(T) | 60 | 0.37 | 1 | 110/220 | 5.2/2.6 | 1" | 1" | 2.0 | 3.0 | 1 | 36 | 42 | 7.6 | 8.6 | 32 | TP825P(T) | TP825P(T)-60hz |
An automatic booster pump raises the pressure of an incoming water supply. This range combines a pump with a small pressure tank and a pressure switch: when a tap is opened and pressure falls to the switch-on setting, the pump starts; when demand stops and pressure rises to the switch-off setting, it stops. The 1 litre pressure tank cushions the system so the pump does not start for every small draw-off.
Two base models are listed. The TP820P(T) is a 0.18 kW pump with 3/4 inch inlet and outlet; at 50Hz it switches on at 0.9 and off at 1.8 kg/cm², with a maximum head of 25 m and maximum flow of 30 L/min. The TP825P(T) is a 0.37 kW pump with 1 inch connections, switching at 1.8 and 2.8 kg/cm² at 50Hz, with up to 30 m head and 35 L/min. 60Hz versions run on 110/220 V and give higher head and flow. Every model is available in a standard version and an anti-microbial version, identified by a B suffix.
Choose the TP820 for single outlets and modest pressure deficits, and the TP825 where more flow or a higher switch-off pressure is needed. Match the frequency and voltage to the local supply.
