Electric actuators

Susin I-Tork economic-style electric actuators for small ball and plug valves and dampers. 3 compact models from 25 to 80 Nm, ISO 5211 mounted, on/off or modulating.
Sizes
One model per row, with its ISO 5211 flange on the left. The bar shows rated torque; each row opens the model in the table.

FAQ
Take the valve’s highest torque, add a safety factor, and pick the smallest model that covers it: ITQ 0020 gives 25 Nm for small 1" ball valves, ITQ 0040 gives 40 Nm and ITQ 0080 gives 80 Nm. Then check the ISO 5211 flange and drive square against the valve.
ITQ 0020: 85–265 VAC free voltage, with a 24 VAC/DC option. ITQ 0040: 110 / 220 VAC or 24 VDC. ITQ 0080: 110 / 220 VAC single phase, 380 / 440 VAC three phase or 24 VDC.
ISO 5211 F03 on the ITQ 0020 (11 × 11 mm square, with a 9 × 9 mm insert), F03 / F04 / F05 / F07 on the ITQ 0040 (14 × 14 mm double square) and F05 / F07 on the ITQ 0080 (17 × 17 mm double square).
The ITQ 0040 and ITQ 0080 take the RPC remote position controller option (4–20 mA input and output), and the ITQ 0080 also a 4–20 mA current transmitter. Both are rated S4 50% for modulating duty.
Yes on the ITQ 0040 (declutchable lever and hex wrench, 6 turns) and the ITQ 0080 (M6 wrench on the worm gear, 7 turns).
ITQ Micro covers small valves up to 80 Nm. For 100 Nm and above, or for features such as torque switches and control modules, the heavy-duty ITQ series runs from 100 to 9,000 Nm.
Compare all 3 ITQ Micro models by torque, time, flange and supply, or send us the valve details and power supply and we’ll pick the model.