ESNC Series Cylinders

About the ESNC ISO 15552 Tie Rod Range

ESNC cylinders are double-acting pneumatic cylinders with a tie rod profile built to ISO 15552. That standard fixes the mounting dimensions, rod thread and port positions for a given bore. In practice, an ISO 15552 cylinder can usually replace another ISO 15552 cylinder of the same bore and stroke without changing the brackets, which makes replacement simpler.

Every model in this series has a non-magnetic piston. This suits machines that do not need end-of-stroke sensing on the cylinder itself, or that already detect position another way. If you need to fit reed or magnetic cylinder switches, look at a magnetic series instead.

The table lists 200 configurations. Bore sizes are 32, 40, 50, 63, 80, 100, 125, 160 and 200 mm. Strokes run from 25 mm to 1000 mm, in 50 mm steps above 200 mm. Part numbers follow the pattern ESNC plus bore plus stroke, so ESNC32X100 is a 32 mm bore with a 100 mm stroke. The series page also lists adjustable cushioning, which slows the piston at the end of travel to reduce impact and noise.

Filter by bore size and stroke to find your configuration. Prices are shown in GBP and you can add items to your basket, or contact Valvenok's UK team for help with sizing.

• Choose bore size from the force needed at your supply pressure.
• Allow a little extra stroke so the piston does not bottom out under load.