Free UK delivery on orders over £150
Panam High Pressure Hex Plugs, Tube Plugs and Pipe Caps in SS 316. NPT, ISO Parallel and 37° JIC thread connections. 10,000 to 15,000 psi. Sizes from 1/8" to 2".
| Part Number | Fitting Type | Pressure | Size | Thread | Quote | |
|---|---|---|---|---|---|---|
| PHP-2N-SS-15K | Hex Plug | 15,000 psi | 1/8" | NPT | ||
| PHP-4N-SS-15K | Hex Plug | 15,000 psi | 1/4" | NPT | ||
| PHP-6N-SS-15K | Hex Plug | 15,000 psi | 3/8" | NPT | ||
| PHP-8N-SS-15K | Hex Plug | 15,000 psi | 1/2" | NPT | ||
| PHP-12N-SS-10K | Hex Plug | 10,000 psi | 3/4" | NPT | ||
| PHP-16N-SS-10K | Hex Plug | 10,000 psi | 1" | NPT | ||
| PHP-2G-SS-15K | Hex Plug | 15,000 psi | 1/8" | ISO Parallel | ||
| PHP-4G-SS-15K | Hex Plug | 15,000 psi | 1/4" | ISO Parallel | ||
| PHP-6G-SS-15K | Hex Plug | 15,000 psi | 3/8" | ISO Parallel | ||
| PHP-8G-SS-15K | Hex Plug | 15,000 psi | 1/2" | ISO Parallel | ||
| PHP-10G-SS-10K | Hex Plug | 10,000 psi | 5/8" | ISO Parallel | ||
| PHP-12G-SS-10K | Hex Plug | 10,000 psi | 3/4" | ISO Parallel | ||
| PHP-16G-SS-10K | Hex Plug | 10,000 psi | 1" | ISO Parallel | ||
| PHP-20G-SS-10K | Hex Plug | 10,000 psi | 1 1/4" | ISO Parallel | ||
| PHP-24G-SS-10K | Hex Plug | 10,000 psi | 1 1/2" | ISO Parallel | ||
| PHP-32G-SS-10K | Hex Plug | 10,000 psi | 2" | ISO Parallel | ||
| PPC-2N-SS-15K | Pipe Cap | 15,000 psi | 1/8" | NPT | ||
| PPC-4N-SS-15K | Pipe Cap | 15,000 psi | 1/4" | NPT | ||
| PPC-6N-SS-15K | Pipe Cap | 15,000 psi | 3/8" | NPT | ||
| PPC-8N-SS-15K | Pipe Cap | 15,000 psi | 1/2" | NPT | ||
| PPC-12N-SS-10K | Pipe Cap | 10,000 psi | 3/4" | NPT | ||
| PPC-16N-SS-10K | Pipe Cap | 10,000 psi | 1" | NPT | ||
| PPC-2G-SS-15K | Pipe Cap | 15,000 psi | 1/8" | ISO Parallel | ||
| PPC-4G-SS-15K | Pipe Cap | 15,000 psi | 1/4" | ISO Parallel | ||
| PPC-6G-SS-15K | Pipe Cap | 15,000 psi | 3/8" | ISO Parallel | ||
| PPC-8G-SS-15K | Pipe Cap | 15,000 psi | 1/2" | ISO Parallel | ||
| PPC-12G-SS-10K | Pipe Cap | 10,000 psi | 3/4" | ISO Parallel | ||
| PPC-16G-SS-10K | Pipe Cap | 10,000 psi | 1" | ISO Parallel | ||
| PTP-4J-SS-10K | Tube Plug | 10,000 psi | 1/4" | 37° JIC | ||
| PTP-5J-SS-10K | Tube Plug | 10,000 psi | 5/16" | 37° JIC | ||
| PTP-6J-SS-10K | Tube Plug | 10,000 psi | 3/8" | 37° JIC | ||
| PTP-8J-SS-10K | Tube Plug | 10,000 psi | 1/2" | 37° JIC | ||
| PTP-10J-SS-10K | Tube Plug | 10,000 psi | 5/8" | 37° JIC | ||
| PTP-12J-SS-10K | Tube Plug | 10,000 psi | 3/4" | 37° JIC | ||
| PTP-16J-SS-10K | Tube Plug | 10,000 psi | 1" | 37° JIC |
Plugs and caps close off the end of a high pressure line or an unused port. They are used to blank spare outlets on manifolds and pump bodies, to seal test points between readings, and to isolate branches during pressure testing or commissioning. This page lists three Panam styles, all in SS 316.
Hex plugs (PHP) screw into a female port and are offered in NPT and ISO parallel threads from 1/8" up to 2". Pipe caps (PPC) fit over a male thread in NPT or ISO parallel, from 1/8" to 1". Tube plugs (PTP) close a 37° JIC flare connection and run from 1/4" to 1". Ratings are 10,000 or 15,000 psi depending on size and type, and the part number suffix (15K or 10K) shows which applies.
Because a plug or cap carries the full line pressure on its face, it should be rated at least as high as the system it closes. Parallel ISO threads also need a suitable sealing washer, whereas NPT relies on the taper and a thread sealant.
