Free UK delivery on orders over £150
Panam Swivel Gauge Adaptors (also known as swivel gauge adapters) with 360° adjustable gauge positioning and silver-plated anti-gall threads. Available in Type M (Standard Metal-to-Metal Sealing, without O-ring) and Type S (Soft Sealing with PTFE/Grafoil). Compatible with 1/2" NPT, BSPP, BSPT, and M20×1.5 thread standards. Stainless Steel 316 construction. Length (L) is in mm; width (W) and across-flats (A/F) dimensions are in inches.
| Part Number | Type | P1 Inlet | P2 Outlet | L (mm) | W – Width (in) | Nut A/F (in) | Cap A/F (in) | Quote | |
|---|---|---|---|---|---|---|---|---|---|
| PSGA-8G-SS | Type M | 1/2" BSPP Male | 1/2" BSPP Female | 73 | 3/4" | 1-1/4" | 1-1/4" | ||
| PSGA-8G-SS-MM | Type M | 1/2" BSPP Male | 1/2" BSPP Male | 77 | 3/4" | 1-1/4" | 1-1/4" | ||
| PSGA-8G-SS-S | Type S | 1/2" BSPP Male | 1/2" BSPP Female | 73 | 3/4" | 1-1/4" | 1-1/4" | ||
| PSGA-8G-SS-S-MM | Type S | 1/2" BSPP Male | 1/2" BSPP Male | 77 | 3/4" | 1-1/4" | 1-1/4" | ||
| PSGA-8N-SS | Type M | 1/2" NPT Male | 1/2" NPT Female | 69 | 3/4" | 1-1/4" | 1-1/4" | ||
| PSGA-8N-SS-MM | Type M | 1/2" NPT Male | 1/2" NPT Male | 73 | 3/4" | 1-1/4" | 1-1/4" | ||
| PSGA-8N-SS-S | Type S | 1/2" NPT Male | 1/2" NPT Female | 69 | 3/4" | 1-1/4" | 1-1/4" | ||
| PSGA-8N-SS-S-MM | Type S | 1/2" NPT Male | 1/2" NPT Male | 73 | 3/4" | 1-1/4" | 1-1/4" | ||
| PSGA-8R-SS | Type M | 1/2" BSPT Male | 1/2" BSPT Female | 69 | 3/4" | 1-1/4" | 1-1/4" | ||
| PSGA-8R-SS-MM | Type M | 1/2" BSPT Male | 1/2" BSPT Male | 73 | 3/4" | 1-1/4" | 1-1/4" | ||
| PSGA-8R-SS-S | Type S | 1/2" BSPT Male | 1/2" BSPT Female | 69 | 3/4" | 1-1/4" | 1-1/4" | ||
| PSGA-8R-SS-S-MM | Type S | 1/2" BSPT Male | 1/2" BSPT Male | 73 | 3/4" | 1-1/4" | 1-1/4" | ||
| PSGA-M20-SS | Type M | M20 × 1.5 Male | M20 × 1.5 Female | 73 | 3/4" | 1-1/4" | 1-1/4" | ||
| PSGA-M20-SS-MM | Type M | M20 × 1.5 Male | M20 × 1.5 Male | 77 | 3/4" | 1-1/4" | 1-1/4" | ||
| PSGA-M20-SS-S | Type S | M20 × 1.5 Male | M20 × 1.5 Female | 73 | 3/4" | 1-1/4" | 1-1/4" | ||
| PSGA-M20-SS-S-MM | Type S | M20 × 1.5 Male | M20 × 1.5 Male | 77 | 3/4" | 1-1/4" | 1-1/4" |
A pressure gauge on a threaded port rarely finishes tightening with the dial facing the right way. Turning it further risks over-tightening, and backing it off risks a leak. A swivel gauge adaptor sits between the process connection and the gauge and allows 360° positioning, so the dial can be turned to face the operator and then locked without twisting the line or the gauge socket.
The PSGA range is offered in two sealing types. Type M uses standard metal-to-metal sealing without an O-ring, which suits higher temperatures or media where elastomers are not wanted. Type S uses soft sealing with PTFE or Grafoil for a lower make-up torque. The threads are silver-plated to reduce galling, a common issue when stainless parts are assembled and disassembled.
Each adaptor is SS316 and is available with 1/2" NPT, 1/2" BSPP, 1/2" BSPT or M20 x 1.5 connections, in male inlet by female outlet or male by male configurations. The table lists overall length in mm and width and across-flats dimensions in inches, so you can check clearance at the gauge position.
