Free UK delivery on orders over £150
Compact electro-hydraulic part-turn actuators with their own pump and a maximum of 8 bar on board, so only electric power is needed. Built on a part-turn actuator originally designed for air, they can replace or retrofit pneumatic actuators. Double acting from 46 to 7,207 Nm, spring return up to 9,274 Nm, on-off or modulating, ATEX Zone 1 & 2.
46 – 9,274 Nm
Max 8 bar on board
D10 – D130 · E10 – E120
ATEX Zone 1 & 2
46 – 7,207 Nm (D10 – D130)
Open up to 9,274 Nm, spring close up to 5,939 Nm (E10 – E120)
Max 8.0 bar
400 V 50/60 Hz or 230 V 50 Hz
180 – 250 W
24 VDC or 230 V 50 Hz
Adjustable by throttle
Hydraulic oil HLP, filtered min. 10 µm
-20°C to +50°C
Zone 1 and 2 (ATEX certified option)
Open / close or modulating
90°, adjustable
ISO 5211, NAMUR plate; connection D, L or DS
ATEX, SIL 2, limit switch box, potentiometer, on-board control box
Hydraulic open and close, 0° / 90°.
| Model | Torque Open / Close | ISO 5211 Flange | Dimensions A × B × C |
|---|---|---|---|
| PANDA D10 | 46 Nm | F05 / F07 | 410 × 298 × 210 mm |
| PANDA D15 | 93 Nm | F05 / F07 | 460 × 306 × 210 mm |
| PANDA D20 | 146 Nm | F05 / F07 | 460 × 332 × 210 mm |
| PANDA D30 | 213 Nm | F07 / F10 | 640 × 350 × 210 mm |
| PANDA D40 | 344 Nm | ||
| PANDA D50 | 443 Nm | ||
| PANDA D60 | 696 Nm | ||
| PANDA D70 | 908 Nm | ||
| PANDA D80 | 1,225 Nm | ||
| PANDA D90 | 1,702 Nm | ||
| PANDA D100 | 2,859 Nm | ||
| PANDA D110 | 4,150 Nm | ||
| PANDA D120 | 5,744 Nm | ||
| PANDA D130 | 7,207 Nm |
Oil opens the valve (0° → 90°), the spring closes it (90° → 0°). Torque shown as start / end of stroke.
| Model | Open, Hydraulic (Nm) | Close, Spring (Nm) | ISO 5211 Flange |
|---|---|---|---|
| PANDA E10 | 102 / 77 | 69 / 44 | F05 / F07 |
| PANDA E15 | 152 / 118 | 94 / 60 | F07 / F10 |
| PANDA E20 | 245 / 187 | 157 / 98 | F07 / F10 |
| PANDA E30 | 371 / 245 | 198 / 126 | F07 / F10 |
| PANDA E40 | On request | On request | |
| PANDA E50 | 638 / 509 | 399 / 269 | |
| PANDA E60 | 846 / 657 | 568 / 379 | |
| PANDA E70 | 1,192 / 946 | 756 / 510 | |
| PANDA E80 | 1,994 / 1,608 | 1,251 / 865 | |
| PANDA E90 | 2,840 / 2,228 | 1,922 / 1,309 | |
| PANDA E100 | 3,989 / 3,124 | 2,620 / 1,754 | |
| PANDA E110 | 4,099 / 3,335 | 2,971 / 2,207 | |
| PANDA E120 | 9,274 / 7,403 | 5,939 / 4,068 |
Only Power Needed
Pump, oil and control block are built in. No compressed air or separate hydraulic supply is required.
Replaces Pneumatic Actuators
Based on a part-turn actuator originally designed for air, with a NAMUR flange for direct connection: suitable for replacing or retrofitting pneumatic actuators.
Fail-Safe Options
Spring return models, or a pressure accumulator, store the energy to move the valve to its safe position on power loss.
Nearly Wear-Free
Mechanically loaded parts run permanently in oil, with no transmission gearbox.
Block Technology
Block construction with O-ring sealing and almost no pipes or fittings; every unit is function-tested before delivery.
Hazardous & Outdoor Use
ATEX certified and SIL 2 versions; suitable for outdoor, sea-air and explosive atmospheres.
46–9,274 Nm
Torque Range
8 bar
On-Board Pressure
27 Models
Double Acting & Spring Return
ATEX
Zone 1 & 2
SIL 2
Certified Option
